Process characteristics of Yanggu cable manufacturer
Release Time：
2020-09-25
The wire and cable manufacturing of Yanggu cable manufacturers is completely different from the manufacturing of most electromechanical products. Electromechanical products usually assemble other parts into parts, and then assemble multiple parts into one product, and the product is measured in units or pieces.
The wire and cable manufacturing of Yanggu cable manufacturers is completely different from the manufacturing of most electromechanical products. Electromechanical products usually assemble other parts into parts, and then assemble multiple parts into one product, and the product is measured in units or pieces. Wires and cables are based on length.
The large-length continuous stacking combination production method of Yanggu cable manufacturer has overall and controllability for the production of wire and cable, which involves and affects:
The various equipment in the production workshops of Yanggu power cable manufacturers and Yanggu cable manufacturers must be properly discharged according to the required technological process of the product, so that the semi-finished products at each stage can be recycled in sequence. Equipment configuration should consider different production efficiencies and balance production capacity. In order for Yanggu cable manufacturers to balance the production capacity of the production line, some equipment may have to be equipped with two or more units. Therefore, it is necessary to reasonably balance the layout of equipment and production sites according to products and output, and consider comprehensively.
The production organization and management of Yanggu cable manufacturers must be scientific, reasonable, thorough, accurate, strict and meticulous. The operator must carefully implement the process requirements. Any problem in any link will affect the smooth progress of the process and affect the quality and delivery of the product. Especially for multi-core cables, if the length of a certain pair or basic unit is short, or there is a quality problem, the length of the entire cable will be insufficient, resulting in scrap. On the contrary, if the length of a certain unit is too long, the Yanggu cable manufacturer must saw it off, causing waste.
The continuous stacking and long-length combined production methods of Haohui and mineral insulated fireproof cable manufacturers will cause a little problem in any link in the production process, which will affect the quality of the entire cable. The more quality defects that occur in the inner layer, and the production is not terminated in time, the greater the loss will be. Since the production of wires and cables is different from assembled products, they can be disassembled, reassembled and replaced.（www.mitoyo.com.cn）
Keywords：
Latest News
Causes of aging of Yanggu cables
2020-08-12
2020-01-01
Haohui cable, quality transmission value
2020-05-31
Xiangguang 100 billion Industrial Park, Yanggu, Shandong